When painting over an existing coating, using this primer first will assure good adhesion between the old andthe new paint.General purpose chlorinated rubber used as a primer on metal surfaces and as a tie coat between different typesof coatings. Can be used above or below the waterline. Compatible with all antifouling and topside paints.Semi-flat Burnt Orange color. Brush, roll or spray.Key featuresSmooth finish provides an excellent bonding surface for topcoatsCan be used as a metal primer or as a tie coatCompatible with all Pettit antifouling bottom paintsEasy to use system for use on all underwater running gearSpecificationsPrimary Usage: Metal surfaces, underwater running gear, trim tabsFormulation: Chlorinated RubberFinish: FlatApplies Over: Bright, cleaned, abraded metalDrying Time: To recoat: 2hrs.; To topcoat: 4hrs. @ 70FNumber of Coats Recommended: 2Thinner: Petit 97 Epoxy Thinner, Model 284216Coverage: Brush/roller: 75sq.ft./qt.; spray: 57sq.ft./qt.Color: Semi-flat Burnt OrangeMore informationFor detailed application instructions see the Pettit Tie coat primer Data Sheet. NOTE: Manufacturer data sheetsare subject to revision. Linked data sheets are believed to be accurate at the time of publication